Skip to content
On this page

Test Runner

WARNING

This is advanced API. If you are just running tests, you probably don't need this. It is primarily used by library authors.

You can specify a path to your test runner with the runner option in your configuration file. This file should have a default export with a class implementing these methods:

ts
export interface VitestRunner {
  /**
   * First thing that's getting called before actually collecting and running tests.
   */
  onBeforeCollect?(paths: string[]): unknown
  /**
   * Called after collecting tests and before "onBeforeRun".
   */
  onCollected?(files: File[]): unknown

  /**
   * Called when test runner should cancel next test runs.
   * Runner should listen for this method and mark tests and suites as skipped in
   * "onBeforeRunSuite" and "onBeforeRunTest" when called.
   */
  onCancel?(reason: CancelReason): unknown

  /**
   * Called before running a single test. Doesn't have "result" yet.
   */
  onBeforeRunTest?(test: Test): unknown
  /**
   * Called before actually running the test function. Already has "result" with "state" and "startTime".
   */
  onBeforeTryTest?(test: Test, retryCount: number): unknown
  /**
   * Called after result and state are set.
   */
  onAfterRunTest?(test: Test): unknown
  /**
   * Called right after running the test function. Doesn't have new state yet. Will not be called, if the test function throws.
   */
  onAfterTryTest?(test: Test, retryCount: number): unknown

  /**
   * Called before running a single suite. Doesn't have "result" yet.
   */
  onBeforeRunSuite?(suite: Suite): unknown
  /**
   * Called after running a single suite. Has state and result.
   */
  onAfterRunSuite?(suite: Suite): unknown

  /**
   * If defined, will be called instead of usual Vitest suite partition and handling.
   * "before" and "after" hooks will not be ignored.
   */
  runSuite?(suite: Suite): Promise<void>
  /**
   * If defined, will be called instead of usual Vitest handling. Useful, if you have your custom test function.
   * "before" and "after" hooks will not be ignored.
   */
  runTest?(test: Test): Promise<void>

  /**
   * Called, when a task is updated. The same as "onTaskUpdate" in a reporter, but this is running in the same thread as tests.
   */
  onTaskUpdate?(task: [string, TaskResult | undefined][]): Promise<void>

  /**
   * Called before running all tests in collected paths.
   */
  onBeforeRun?(files: File[]): unknown
  /**
   * Called right after running all tests in collected paths.
   */
  onAfterRun?(files: File[]): unknown
  /**
   * Called when new context for a test is defined. Useful, if you want to add custom properties to the context.
   * If you only want to define custom context with a runner, consider using "beforeAll" in "setupFiles" instead.
   */
  extendTestContext?(context: TestContext): TestContext
  /**
   * Called, when certain files are imported. Can be called in two situations: when collecting tests and when importing setup files.
   */
  importFile(filepath: string, source: VitestRunnerImportSource): unknown
  /**
   * Publicly available configuration.
   */
  config: VitestRunnerConfig
}
export interface VitestRunner {
  /**
   * First thing that's getting called before actually collecting and running tests.
   */
  onBeforeCollect?(paths: string[]): unknown
  /**
   * Called after collecting tests and before "onBeforeRun".
   */
  onCollected?(files: File[]): unknown

  /**
   * Called when test runner should cancel next test runs.
   * Runner should listen for this method and mark tests and suites as skipped in
   * "onBeforeRunSuite" and "onBeforeRunTest" when called.
   */
  onCancel?(reason: CancelReason): unknown

  /**
   * Called before running a single test. Doesn't have "result" yet.
   */
  onBeforeRunTest?(test: Test): unknown
  /**
   * Called before actually running the test function. Already has "result" with "state" and "startTime".
   */
  onBeforeTryTest?(test: Test, retryCount: number): unknown
  /**
   * Called after result and state are set.
   */
  onAfterRunTest?(test: Test): unknown
  /**
   * Called right after running the test function. Doesn't have new state yet. Will not be called, if the test function throws.
   */
  onAfterTryTest?(test: Test, retryCount: number): unknown

  /**
   * Called before running a single suite. Doesn't have "result" yet.
   */
  onBeforeRunSuite?(suite: Suite): unknown
  /**
   * Called after running a single suite. Has state and result.
   */
  onAfterRunSuite?(suite: Suite): unknown

  /**
   * If defined, will be called instead of usual Vitest suite partition and handling.
   * "before" and "after" hooks will not be ignored.
   */
  runSuite?(suite: Suite): Promise<void>
  /**
   * If defined, will be called instead of usual Vitest handling. Useful, if you have your custom test function.
   * "before" and "after" hooks will not be ignored.
   */
  runTest?(test: Test): Promise<void>

  /**
   * Called, when a task is updated. The same as "onTaskUpdate" in a reporter, but this is running in the same thread as tests.
   */
  onTaskUpdate?(task: [string, TaskResult | undefined][]): Promise<void>

  /**
   * Called before running all tests in collected paths.
   */
  onBeforeRun?(files: File[]): unknown
  /**
   * Called right after running all tests in collected paths.
   */
  onAfterRun?(files: File[]): unknown
  /**
   * Called when new context for a test is defined. Useful, if you want to add custom properties to the context.
   * If you only want to define custom context with a runner, consider using "beforeAll" in "setupFiles" instead.
   */
  extendTestContext?(context: TestContext): TestContext
  /**
   * Called, when certain files are imported. Can be called in two situations: when collecting tests and when importing setup files.
   */
  importFile(filepath: string, source: VitestRunnerImportSource): unknown
  /**
   * Publicly available configuration.
   */
  config: VitestRunnerConfig
}

When initiating this class, Vitest passes down Vitest config, - you should expose it as a config property.

WARNING

Vitest also injects an instance of ViteNodeRunner as __vitest_executor property. You can use it to process files in importFile method (this is default behavior of TestRunner and BenchmarkRunner).

ViteNodeRunner exposes executeId method, which is used to import test files in a Vite-friendly environment. Meaning, it will resolve imports and transform file content at runtime so that Node can understand it.

TIP

Snapshot support and some other features depend on the runner. If you don't want to lose it, you can extend your runner from VitestTestRunner imported from vitest/runners. It also exposes BenchmarkNodeRunner, if you want to extend benchmark functionality.

Your task function

You can extend Vitest task system with your tasks. A task is an object that is part of a suite. It is automatically added to the current suite with a suite.custom method:

js
// ./utils/custom.js
import { getCurrentSuite, setFn } from 'vitest/suite'

export { describe, beforeAll, afterAll } from 'vitest'

// this function will be called, when Vitest collects tasks
export const myCustomTask = function (name, fn) {
  const task = getCurrentSuite().custom(name)
  task.meta = {
    customPropertyToDifferentiateTask: true
  }
  setFn(task, fn || (() => {}))
}
// ./utils/custom.js
import { getCurrentSuite, setFn } from 'vitest/suite'

export { describe, beforeAll, afterAll } from 'vitest'

// this function will be called, when Vitest collects tasks
export const myCustomTask = function (name, fn) {
  const task = getCurrentSuite().custom(name)
  task.meta = {
    customPropertyToDifferentiateTask: true
  }
  setFn(task, fn || (() => {}))
}
js
// ./garden/tasks.test.js
import { afterAll, beforeAll, describe, myCustomTask } from '../utils/custom.js'
import { gardener } from './gardener.js'

describe('take care of the garden', () => {
  beforeAll(() => {
    gardener.putWorkingClothes()
  })

  myCustomTask('weed the grass', () => {
    gardener.weedTheGrass()
  })
  myCustomTask('water flowers', () => {
    gardener.waterFlowers()
  })

  afterAll(() => {
    gardener.goHome()
  })
})
// ./garden/tasks.test.js
import { afterAll, beforeAll, describe, myCustomTask } from '../utils/custom.js'
import { gardener } from './gardener.js'

describe('take care of the garden', () => {
  beforeAll(() => {
    gardener.putWorkingClothes()
  })

  myCustomTask('weed the grass', () => {
    gardener.weedTheGrass()
  })
  myCustomTask('water flowers', () => {
    gardener.waterFlowers()
  })

  afterAll(() => {
    gardener.goHome()
  })
})
bash
vitest ./garden/tasks.test.js
vitest ./garden/tasks.test.js

WARNING

If you don't have a custom runner or didn't define runTest method, Vitest will try to retrieve a task automatically. If you didn't add a function with setFn, it will fail.

TIP

Custom task system supports hooks and contexts. If you want to support property chaining (like, only, skip, and your custom ones), you can import createChainable from vitest/suite and wrap your function with it. You will need to call custom as custom.call(this), if you decide to do this.

Released under the MIT License.